Signal Converter Isolators

 Status Smart Universal Signal Conditioner

 

• Simple Configuration Via USB Port 
  
•  Universal Rtd, Thermocouple, Mv, V, MA and Potentiometer Input 
  
•  Isolated Universal Voltage or Current Output 
  
•  User Trim / User Manual Configuration 
  
•  Dual C/O Relay Trip Outputs 
  
•  22/250V AC or DC power supply 
  
•  Powers both input and output current loops

 

The SEM1700 is a new generation DIN rail mounted universal signal conditioner from Status Instruments. It has been designed to accept most common process and temperature sensor inputs and provide the user with a programmable current or voltage output signal plus dual trip relays. Isolation is provided between input, outputs and supply. All temperature ranges are linear to temperature. Both input and output loop excitation is provided as well as a fully universal power supply.

Designed for ease of use, our latest USB interface is fitted for quick and easy configuration. Just connect a standard USB cable between the SEM1700 and your PC. Using our free configuration software, your PC will automatically upload the existing configuration data and guide you through any changes you wish to make. To further help save time, the SEM1700 does not need to be wired to a power supply during the configuration process, it is powered via the USB interface from your PC.

 

Status SEM1610 Universal RAIL Transmitter 

• Simple USB Configuration Port
  
• Universal Pt100,Thermocouple, mV, mA Input
  
• Push Button User Trim
  
• 4/20mA two wire Output
  
• 10 Year Warranty

The SEM1610 is the new generation DIN rail mounted temperature transmitter from Status Instruments. It has been designed to accept most common process and temperature sensor inputs and provide the user with a standard two wire 4-20 mA output signal. Isolation is provided between input and output and all temperature ranges are linear to temperature.

Designed for ease of use, our latest USB interface is fitted for quick and easy configuration. Just connect a standard USB cable between the SEM1610 and your PC and you’re ready to go. Using our free configuration software, your PC will automatically read the current configuration data and guide you through any changes you wish to make. To further help save time, the SEM1610 does not need to be wired to a power supply during the configuration process, it is powered via the USB interface from your PC. The following parameters are configurable :-

 

Status SEM1620 Universal RAIL Transmitter 

• Simple USB Configuration Port
  
• Universal Pt100,Thermocouple,mV,mA Input
  
• Push Button User Trim
  
• Three Wire voltage Output
  
• 10 Year Warranty

The SEM1620 is the new generation DIN rail mounted temperature amplifier from Status Instruments. It has been designed to accept most common process and temperature sensor inputs and provide the user with a three wire voltage output signal. Isolation is provided between input and output and all temperature ranges are linear to temperature.

Designed for ease of use, our latest USB interface is fitted for quick and easy configuration. Just connect a standard USB cable between the SEM1620 and your PC and you’re ready to go. Using our free configuration software, your PC will automatically read the current configuration data and guide you through any changes you wish to make. To further help save time, the SEM1620 does not need to be wired to a power supply during the configuration process, it is powered via the USB interface from your PC. The following parameters are configurable :-

INPUT TYPE	LOW RANGE	HIGH RANGE	UNITS	OUTPUT	BURNOUT	USER TRIM
PT100 T/C K, J, E, N, T, R, S mV mA	Input @ 4mA	Input @ 20mA	°F, °C mV, mA	(0 to 10)V (2 to 10)V (0 to 5)V (1 to 5)V (0 to 1)V	Up/Scale Down/Scale	On , Off

The software allows the user to set factory default settings. The SEM1620 is also provided with user push button trim, allowing trim adjustments at both offset and span. The user trim function can be locked during configuration if not required. The range led indicates out of range input during normal operation, during user trim it is used to indicate the stage of trim.
As the SEM1620 case design is based on the DIN43880 standard, a wide range of are available to the user, offering both visible and user access to the front panel functions.

Status SEM1630 USB Programmable Universal Input DIN RAIL Trip Amplifier 

• Simple USB Configuration Port
  
• Universal Pt100,Thermocouple,mV,mA Input
  
• Dual Relay Outputs 250V AC @ 1A
  
• Relay Contacts isolated from each other
  
• 10 Year Warranty

The SEM1630 is the new generation DIN rail mounted temperature amplifier from Status Instruments. It has been designed to accept most common process and temperature sensor inputs and provide the user with a dual trip output. Isolation is provided on all three ports. All temperature ranges are linear to temperature.

Designed for ease of use, our latest USB interface is fitted for quick and easy configuration. Just connect a standard USB cable between the SEM1630 and your PC and you’re ready to go. Using our free configuration software, your PC will automatically read the current configuration data and guide you through any changes you wish to make. To further help save time, the SEM1630 does not need to be wired to a power supply during the configuration process, it is powered via the USB interface from your PC. The following parameters are configurable :-

INPUT TYPE	UNITS	TRIP A Level	TRIP A Setpoint	TRIP A hysteresis	TRIP B Level	TRIP B Setpoint	TRIP B hysteresis
PT100 T/C K, J, E, N, T, R, S mV mA	°F, °C mV, mA	High Low	Set in units	Set in units	High Low	Set in units	Set in units

The software allows the user to set factory default settings The range led indicates out of range input during normal operation.
Alarm LEDs are provided for each trip.