Indicators

STATUS DM540 TEMPERATURE INDICATOR

•  20 mm LCD Display
• Max/Min Logging
  
• Pt100 Temperature Sensor
  
•  Never Needs Calibrating
  
•  Stainless Steel Case (100 mm diameter)
  
• IP65 Enclosure
  

DM540 is a battery-powered Digital Thermometer which indicates the temperature with a selectable update rate and stores the maximum and minimum readings for later recall.

The thermometer operates from standard "AA" alkaline batteries for over 2 years at the 12 second update rate.

A selection of compatible temperature sensors are available with various immersion lengths and process connections.

STATUS DM600 TEMPERATURE INDICATOR

• RTD or TC input options
  
• Battery powered
  
•  Push button configurable
  
•  4 digit display
  
•  Housing ABS plastic or stainless
  
•  Sealed to IP67
  
•  10 year warranty
  
•  Atex approved in ABS housing  
  

The DM600 series of battery powered indicators accepts either an RTD (DM640P) or a Thermocouple (DM640TC) input. Each device shows the temperature on a 4 digit LCD display.

The unit is microprocessor based. The sensor type is selected from a simple to use menu system which is navigated by the use of three push buttons located on the rear of the display. This feature enables the user to easily configure the device in the field without the use of any other equipment. The DM640P and DM640TC are sealed into a cap as pictured above. There are several mounting options including the SCH4 series of enclosures and a stainless steel option.

ATEX versions are available for use in hazardous dust and gas areas.

STATUS DM700 TEMPERATURE INDICATOR

• 10 Year Warranty       
  
• 4 Digit LED Display                 
  
• Custom Linearisation               
  
• Fully Programmable by Push Buttons               
  
• Loop Powered            
  
• ATEX Version available                      

Small and compact, the DM700 has been designed to be completely enclosed in a clear polycarbonate cap which fits to our standard SCH4 enclosure. Alternatively it is available with a choice of mountings to fit other standard connecting heads.

The unit is microprocessor based and set up is achieved by means of three push button switches located on the underside of the module following a simple menu structure. The (4 to 20) mA loop powered indicator can have a number of standard linearisations applied, such as square root, or a custom characteristic can be entered. Rtd and Thermocouple versions can be combined with a (4 to 20) mA transmitter (two wire current sink) with the transmission range set from the push buttons.
The DM700 series can be fitted in a selection of enclosures to achieve IP67 sealing.
A unique feature of the RTD input is the ability to enter sensor calibration data to achieve an exact match for greatest accuracy.

 

STATUS DM3400 TEMPERATURE INDICATOR

•  Galvanically Isolated Input
•  Thermocouple or Pt100 Input - DM3410  
• Current or Voltage Input - DM3420
•  True RMS Current and Voltmeter - DM3430
  
•  Flexible Configuration using Option "Pods" 
  
•  Max / Min display – DM3420 
  
•  User Non Linear Feature for Tank Level Applications 
  
•  Internal Power Supply for Current Loop Exitation
   

Designed without compromise, the DM3400 series uses leading edge technology to accept all commonly used temperature and process inputs.

Engineering units are displayed on a high efficiency daylight readable LED display.

The indicators can be used "standalone" or, using the Modbus serial communications, as part of a larger system.

The highly innovative case design features option "pods" which can be installed without dismantling or re-calibration.

Pods include:

• Relay Output
• Isolated (4 to 20) mA Re-transmission
• RS485 Modbus Communications

 

STATUS DM3600 TEMPERATURE INDICATOR

• Universal Input
• Flow Totaliser Functions
  
• 6 Digit Display
  
• Programmable Relay & Current Outputs
  
• RS485 Serial MODBUS comms 
  
• IP65 Sealed Front
  
• Internal Power Supply for Loop Exitation
  
• Custom Software For Your Application Option
  
• Programmable Via The Front Panel Or Remote PC 
• User Non Linear Function For Tank Level Applications
  

The DM3600 is an intelligent digital panel meter that can accept inputs from a wide variety of sensors and display the signal digitally. In addition, it has the facility to accept up to two option "Pods" which can be either isolated (4 to 20) mA re-transmission or two normally open alarm relays.

The DM3600 is available in two models. The DM3600U which is a universal input panel indicator and the DM3600A, a universal panel indicator with totaliser functions.

All functions are programmable via the integral front panel keys or via the optional RS485 serial communications port using the Modbus protocol. To facilitate integration into a Scada system, an OPC server is available which also interfaces to the Medacs, smart DIN rail Signal Conditioner product range, seamlessly integrating front and back of panel instruments.

The DM3600 supports TFML (Transfer Function Module Library) i.e. the ability to download custom functionality by means of standard modules available from the web site. This allows pre-written or custom control functions to be quickly and easily incorporated.

The DM3600A totaliser function enables non-volatile storage of the integrated total to be maintained within the unit, even after loss of power. Output options can be selected to operate on Process Variable (PV) or Total.

 

STATUS SEM610 TEMPERATURE INDICATOR

• Simple configuration via USB port
  
• Isolated PT100, thermocouple input
  
• Display temperature in °C /°F or output drive in mA
  
• Push button user trim
  
• (4 to 20) mA two wire output
  
• Housing ABS plastic or stainless steel
  
• 10 year warranty

The SEM710 is the first of a new generation head mounted temperature transmitter with display feature, from Status Instruments. It has been designed to accept most common process and temperature sensor inputs and provide the user with a standard two wire (4 to 20) mA output signal. Isolation is provided between input and output and all temperature ranges are linear to temperature. The addition of a display provides the user with instant information of the loop condition at the point of measurement. It comes in either our SCH4 ABS plastic connector head or our new SCH15 Stainless steel connector head.

Designed for ease of use, our latest USB interface is fitted for quick and easy configuration. Just connect a standard USB cable between the SEM710 and your PC. Using our free configuration software, your PC will automatically upload the existing configuration data and guide you through any changes you wish to make. To further help save time, the SEM710 does not need to be wired to a power supply during the configuration process, it is powered via the USB interface from your PC.