Wireless Systems and Products

Emerson Wireless Field Starter Kit

The Smart Wireless Field Starter Kit starts with:

• You can choose how many and what combination of Emerson wireless devices comprise your Smart Wireless Field Starter kit. Choose from: wireless pressure, temperature, level, flow, vibration, discrete switches, or pH
• A secure, robust 1420 wireless communications gateway
• AMS Device Manager software for predictive diagnostics from your wireless devices
• SmartStart™ Services to help you with your first startup, including a full network health assessment to ensure robust communications plus verification of device functionality through your chosen output (Modbus, TCP/IP, Ethernet, etc.) SmartStart™ Services include the startup and commissioning of wireless industrial process control systems, technical support services, troubleshooting services and software installation.
  

Note: The number of wireless devices is flexible. You may order more than 5 units and adjust the mix of pressure, temperature, level, flow, vibration, discrete switches, or pH devices

Ring Insteng today on +44 2920 815000 to discuss your requirements and receive a qoute.

Emerson Smart Wireless THUM Adapter

You Can't Improve What You Can't See
Most plants have hundreds or even thousands of HART instrumentation points, all equipped with rich diagnostics and process information, yet this valuable information often goes unused because it's too difficult and costly to access through traditional wired means. Not anymore...

Unlock the Value in Your Existing Field Devices
The Smart Wireless THUM Adapter is a device that can retrofit on any existing two or four-wire HART device, and it enables wireless transmission of measurement and diagnostic information that was previously not available. It's an easy way to gain access to the field intelligence already in the plant. Key benefits include:

• Extend predictive intelligence to areas not possible before due to technical
  or economic reasons
• Make any HART device wireless to enable new measurement points
• Gain access to advanced instrument diagnostics
• Remotely manage devices and monitor device health
• Efficiently gather data from multivariable devices
• Enable enhanced valve capabilities

Emerson Smart Wireless Gateway

The Smart Wireless Gateway connects WirelessHART™ self-organizing networks with host systems and data applications.  Modbus communications over RS-485 or Ethernet provide universal integration and system interoperability.  The optional OPC functionality from the Gateway offers a means to connect to newer systems and applications while providing a richer set of data.

The Smart Wireless Gateway provides industry leading security, scalability, and data reliability.  Layered security ensures that the network stays protected.  Additional devices can be added at anytime.  There is no need to configure communication paths because the Gateway manages the network automatically.  This feature also ensures that WirelessHART field devices have the most reliable path to send data.

Features 

•	Host integration with DeltaV™ and Ovation®
	-	Gain real-time information on process and assets with intuitive operator interface
	-	Native interface between control system and gateway
•	Legacy Integration
	-	Smart Wireless Gateway connects legacy hosts, Serial Modbus®, and Ethernet or OPC output.
•	Complete asset management with AMS Device Manager
	-	Manage predictive diagnostics from wired and wireless field devices to identify problems before the process is effected
	-	Streamline wireless device configuration through Smart Wireless Gateway
•	Other Interfaces
	-	Web interface and AMS Wireless Configurator are standard with every gateway for set-up and initial configuration of wireless devices
	-	Data historian connectivity for documentation and compliance information

 

MTL 105U-L Wireless Process Signals  

The Unidirectional Wireless I/O range of products is suitable for connecting to a single sensor or group of sensors and provides an economical solution for remote monitoring systems. They can also be used in more complex networks as signal transmitters or receivers.
Typical Applications
General purpose monitoring or control applications
Features 

• two digital/pulse inputs, one analog input and one thermocouple/mV input 
• WIB-net intelligent wireless protocol, peer-to-peer communications; exception reporting; reliable self-checking messages; highly secure data encryption.
• set-point status on analog input and thermocouple available as an “internal” input
• internal monitoring and alarm on low supply voltage - this alarm can be transmitted by radio. 
• easily configured to repeat the transmission several times to ensure that the transmission is received correctly.
• used in conjunction with Multi I/O and Data Bus Interface units which act as receiver units.

905U-L - Using 900MHz spread spectrum -suitable for  North & South America, Australia / NZ, parts of Asia, parts of Middle East and Africa.

MTL 240U-E Wireless Ethernet Modem & Serial Device Server

Typical Applications

Connecting PLC’s in factory automation applications
Accessing field data loggers or data-acquisition units in Process plants & Wireless video applications

Features

• Uses Global 2.4GHz ISM band.
• 10/100 BaseT Ethernet plus RS232/RS485 serial ports. 
• 802.11b compliant 2.4GHz DSSS, 100mW and 300mW, wireless data up to 11 Mbits/sec.
• Typical line-of-sight distance 5 miles North America (4W ERP); 1km elsewhere (100mW ERP)
• Configurable as Access Point / Client; Bridge / Router / WDS mesh-network repeater.
• Automatic changeover to another Access Point if the wireless link fails, self-healing mesh network.  
• Military-grade AES security encryption of wireless data,WPA2 security. 
• Firewall protection and efficient wireless management.
• Modbus Master capability for both Modbus TCP and serial Modbus RTU.  
• Message filtering at MAC & IP address level.
• 802.11 WDS mesh networking. 
• Configuration and diagnostics via web-browser.
• Remote configuration and diagnostics via the wireless link. 

MTL 805U-E Wireless Ethernet Modem

The 805UE is an ideal solution for Ethernet connections in process control and automation applications - PLC’s, DCS, SCADA, data acquisition

Typical Applications

Connecting PLC’s in factory automation applications.
Accessing field data loggers or data-acquisition units in process plants.

Features 

• 10/100 BaseT Ethernet, wireless data up to 76.4 Kbits/sec.
• 869 MHz 250KHz channel-spacing, 500mW (10% duty factor), 5mW (100%)
• Configurable as Access Point / Client /  Bridge / Router  
• Multiple layers of error-detection and correction
• Automatic changeover to another Access Point if the wireless link fails
• Military-grade AES security encryption Message filtering at MAC address level
• Two serial interfaces, RS232 and RS485
• Discrete channel for status I/O, for failure status or external status transfer
• Modbus Master capability for both Modbus TCP and serial Modbus RTU.  
• Remote configuration and diagnostics via the wireless link

 

Honeywell XYR 6000 Wireless Transmitters

XYR 6000 Absolute
		XYR 6000 absolute pressure transmitters, STAW94L, are used in a wide variety of applications as part of the Honeywell OneWireless solution
XYR 6000 Analog
		XYR 6000 high level analog input transmitters, STIW600, accept current or voltage inputs to be wirelessly transmitted as part of the Honeywell OneWireless solution
XYR 6000 Differential
		XYR 6000 differential pressure transmitters, STDW924/930/974, are used in a wide variety of applications as part of the Honeywell OneWireless solution
XYR 6000 Gauge
		XYR 6000 gauge pressure transmitters, STGW944/94L/974/97L/98L, are used in a wide variety of applications as part of Honeywell's OneWireless solution.
XYR 6000 SmartCET
		XYR 6000 SmartCET® transmitters, CETW6000M, dramatically reduces the cost of corrosion monitoring as part of the Honeywell OneWireless solution
XYR 6000 Temperature
		XYR 6000 temperature transmitters, STTW400, are used in a wide variety of applications requiring thermocouple or RTD measurements as part of the Honeywell OneWireless solution

 

Signatrol SL400 Wireless Radio Telemetry System

The SL400 system is a radio based wireless telemetry system. Ideal for retro fitting a monitoring system into an existing installation with minimum downtime and cost. The SL400 system comprises of remote radio transmitters that measure temperature, relative humidity, low differential pressure, mA or voltage signals and periodically transmits the values back to a receiving base station. The radio transmitters operate on the worldwide, license free frequency and have an output power of only 10mW which does not interfere with other sensitive electronic equipment but allows up to 1000m transmission range.

The SL400 base stations can now be supplied with Ethernet connectivity. This means that there is no longer a restriction on the distance from the transmitters to the base station. The SL400-ETHERNET base station can be connected to your existing Ethernet network in a convenient location to pick up the relevant transmissions and the data passed over your network. The software supports up to 20 base stations.